Advertisement

… or why you should care about “OOMScoreAdjust” in your systemd-enabled docker-images Recently I put together a docker image with “PostgreSQL 9.4” installed from the project’s software repository on “CentOS 7.1” to back a rails application. Unfortunately I was not abled to run the “PostgreSQL”-server in a container based on that image. It failed with exit code 206/OOM_ADJUST. In this article I’m going to describe the reason for the failure using a minimal failing example.

Preface

I normally run distributions which use “systemd” as PID 1: Arch Linux on workstations/servers and “CentOS” on servers. I like “systemd” as process manager a lot. That’s why I decided to use it within the docker images as well.

The problem occurs with “systemd 208”, which is the packaged version for “CentOS 7.1.1503”. According to upstream the problem has long been fixed in one of the newer releases of “systemd”, but it seems as if the fix has not been backported by CentOS so far. As of the time writing, I use “docker” 1.8.3 on all of my machines.

I’m going to reproduce the problem with a minimal failing example: Just a so called oneshot-service which outputs a string and then exits.

Reproduce the issue

Setup a failing “docker” image

Please, create a working directory first and make it your current working directory.

mkdir -p my-failing-docker-image
cd my-failing-docker-image

After that, create a Dockerfile with the following content.

FROM feduxorg/centos:latest
MAINTAINER me@example.org
ADD test.service /etc/systemd/system/test.service

Then create the test.service-file which should be added to the image. It should contain the following lines.

[Unit]
Description=Test Service

[Service]
Type=oneshot
ExecStart=/usr/bin/echo asdf
OOMScoreAdjust=-1000

Build the image

After you have created the files, build the docker image.

docker build -t exampleorg/my-failing-docker-image .

Run the container

Since this is a “systemd”-enabled image, you need to invoke docker with the following commandline. The most important part is -v /sys/fs/cgroup:/sys/fs/cgroup. Without that volume “systemd” will start correctly and outputs an error message instead. The rest of the commandline only makes sure, that the container is safely removed after you stopped it.

docker run -it --rm --name my-failing-docker-image-1 -v /sys/fs/cgroup:/sys/fs/cgroup exampleorg/my-failing-docker-image
# => systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT +SELINUX -IMA +SYSVINIT -LIBCRYPTSETUP -GCRYPT -ACL -XZ)
# => Detected virtualization 'docker'.
# => Welcome to CentOS Linux 7 (Core)!
# [...]

Don’t be worried, that you don’t see a login prompt after starting the container. The corresponding service console-getty is masked in “docker”’s default “CentOS”-image – look for “masked” in systemd.unit (5) if want to read more about that topic. You can use docker exec instead to get a shell inside the container – see the full commandline below.

Open Shell within the container

To open a shell in the container run the following command in another terminal.

docker exec -it my-failing-docker-image-1 bash
# => [root@f410a6d1b93f /]#

Run the service

Now try to run the faulty test service.

systemctl start test.service

When you have a look at the status of the service you should see something similar to this. The exit status is 206/OOM_ADJUST and “systemd” reports Failed to start Test Service.

systemctl status test.service
# => test.service - Test Service
# =>    Loaded: loaded (/etc/systemd/system/test.service; static)
# =>    Active: failed (Result: exit-code) since Sat 2015-10-24 08:18:07 UTC; 12s ago
# =>   Process: 117 ExecStart=/usr/bin/echo asdf (code=exited, status=206/OOM_ADJUST)
# =>  Main PID: 117 (code=exited, status=206/OOM_ADJUST)
# =>
# => Oct 24 08:18:07 f410a6d1b93f systemd[1]: test.service: main process exited, code=exited, status=206/OOM_ADJUST
# => Oct 24 08:18:07 f410a6d1b93f systemd[1]: Failed to start Test Service.
# => Oct 24 08:18:07 f410a6d1b93f systemd[1]: Unit test.service entered failed state.

Fixing the Test Image

Stop the container

Now let’s move on and fix that. First of all you should stop the container choosing one of the following options: Run systemctl poweroff from within the container and wait for the power off to finish …

systemctl poweroff

… or stop the container from “the outside” by using the docker kill-command. Normally I choose the docker kill-command, but both work fine – and of course you can use docker stop as well.

docker kill my-failing-docker-image-1
# or
docker stop my-failing-docker-image-1

Fix the service

After you stopped the container, you need to remove the line with OOMScoreAdjust from the test.service-file …

[Unit]
Description=Test Service

[Service]
Type=oneshot
ExecStart=/usr/bin/echo asdf

… and build the image again. To read some more about OOMScoreAdjust have a look at the “systemd.exec (5)” manual

docker build -t exampleorg/my-failing-docker-image .

When the build has finished you can run the fixed container.

docker run -it --rm --name my-failing-docker-image-1 -v /sys/fs/cgroup:/sys/fs/cgroup exampleorg/my-failing-docker-image

Run and check the service again

Please open a shell in the container …

docker exec -it my-failing-docker-image-1 bash

… and run the fixed service.

systemctl start test.service

When you have a look at the status of the service you should see something similar to the following output. Now the service works as expected.

systemctl status test.service
# => test.service - Test Service
# =>    Loaded: loaded (/etc/systemd/system/test.service; static)
# =>   Drop-In: /run/systemd/system/test.service.d
# =>            └─00-docker.conf
# =>    Active: inactive (dead)
# => 
# => Oct 24 08:41:40 f410a6d1b93f systemd[1]: Starting Test Service...
# => Oct 24 08:41:40 f410a6d1b93f echo[217]: asdf
# => Oct 24 08:41:40 f410a6d1b93f systemd[1]: Started Test Service.

Fixing the “PostgreSQL”-image

As mentioned at the beginning, I had that issued with “PostgreSQL” 9.4. To fix the “PostgreSQL”-image I added a RUN-command similar to the following one to my Dockerfile.

RUN sed -i -e "s/OOMScoreAdjust/# OOMScoreAdjust/" /usr/lib/systemd/system/postgresql-9.4.service

Software Packages with “OOMScoreAdjust”

From my knowledge the following packages contain a .service-file which includes OOMScoreAdjust and can be installed on “CentOS 7.1”. There might be others as well.

Software Package Service Source
PostgreSQL 9.4 postgres.service PostgreSQL-Project
dbus 1.6.12 dbus.service CentOS-Repository

Conclusion

If you are going to use “systemd”-enabled “docker” images with “systemd 208”, make sure that none of the involved “service”-unit files contain OOMScoreAdjust. Otherwise they won’t start in your container(s). Alternatively try to use the latest version of “systemd” in your “docker” image.

Thanks for reading!

References

Updates

Update 2015-10-28 #1

  • Change the title of this article to see, if there is more interest in this article with the new title
  • Add link to systemd.exec manual

Update 2015-10-28 #2

  • Added references to bug trackers

Discussion

If you found a mistake in this article or would like to contribute some content to it, please file an issue in this Git Repository

Disclaimer

The contents of this article are put together to the best of the authors' knowledge, but it cannot be guaranteed that it's always accurate in any environment. It is up to the reader to make sure that all information found in this article, does not do any damage to the reader's working environment or wherever this information is applied to. In no event shall the authors or copyright holders be liable for any claim, damages or other liability, arising from, out of or in connection with this article. Please also note the information given on the Imprint' page.